Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Repair for Corpus Christi Homeowners
A garage door that won’t close all the way, a snapped spring, or an opener that grinds and stalls leaves your home open and your car stuck. That’s the problem we solve. Spencer Garage Door Repair works on what you already have, and garage doors are all we do. Our technicians have up to 15 years of experience, and we’re factory-familiar with eight major door and opener brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Most brands. One specialist. What you get is fast diagnosis and a lasting fix from someone who reads the door and opener as a system, not a guess. We offer same-day service across Corpus Christi, free estimates, and upfront pricing agreed before any work starts. Call (866) 389-3763. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Garage Door Spring Repair
Garage Door Spring Repair restores the tension that actually lifts your door, and it’s the fix we’re called for more than any other in Corpus Christi. A torsion spring above the door or a pair of extension springs along the tracks carries most of the door’s weight. When one lets go, the door suddenly feels impossibly heavy and may not open at all, or it drops the last few inches. Springs can also weaken slowly, which is why some doors sound fine but lift sluggishly for months before failing.
We match the spring to your door’s weight and cycle count, replace both sides together when the springs are a matched pair, and retest the door’s balance before we leave. Typical spring repair runs $180 – $340 for one spring. Since a matched pair is usually replaced together, a pair costs about twice that. The written estimate sets the final price. Springs are under high tension and can cause serious injury if handled without the right tools, so this isn’t a DIY job.
What a Snapped Spring Feels Like
A loud bang from the garage followed by a door that won’t lift is the classic sign. You may also see a visible gap in the coil. Either way, stop using the opener until a technician looks at it.
Signs Your Springs Are Overdue
A door that feels heavy, lifts unevenly, or pauses on the way up is telling you something. Cracks, rust, or a stretched appearance on extension springs are worth a look before they fail outright.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Garage Door Sensor Repair
Garage Door Sensor Repair fixes the small photo-eye pair at the bottom of your tracks that tells the opener to stop when something blocks the door. When one sensor goes out of alignment, loses power, or gets covered, the door reverses a foot off the ground or refuses to close at all. It’s one of the most common complaints we hear from Corpus Christi homeowners, and it’s usually a quick diagnosis.
We test both sensors for alignment and signal, check the wiring back to the opener, and confirm the safety reverse works the way it should. A sensor that’s simply nudged out of line is a small fix; a failed unit or a broken wire takes a bit more. Typical sensor and safety-reverse work runs $120 – $320 depending on what we find, and the written estimate sets the final price. Any repair involving opener electronics is worth having a trained technician handle.
Why the Door Reverses
A door that comes down then immediately goes back up is almost always a sensor issue or a misread obstruction. We confirm which before touching anything else.
After a Power Outage
Sensors can lose their alignment or the opener can forget its travel limits after an outage. A quick reset and test puts the safety reverse back in order.
Emergency Garage Door Repair
Emergency Garage Door Repair gets you back to a secure, working door when something fails without warning. A door stuck open overnight, a snapped cable, or a door off its track after a bump is the kind of problem that can’t wait for a scheduled appointment. We treat those calls as a priority, and we send a specialist rather than a generalist.
We come out, diagnose the failure, and quote the repair before any work starts so there’s no surprise on the invoice. Typical emergency repairs fall in the $150 – $600 range depending on the part and the damage; a snapped cable or off-track door usually sits higher, a simple sensor or roller fix lower. Call (866) 389-3763. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Fast dispatch gets a technician to your door the same day when the schedule allows.
When to Call Instead of Waiting
If the door is stuck open, hanging crooked, or a cable has snapped, call right away. Leaving it that way can lead to more damage or a security problem.
What We Bring
We carry the tools and common parts for the job and confirm what’s needed once we see the door. If a part has to be ordered, we tell you that before we start.
Garage Door Panel Replacement
Garage Door Panel Replacement swaps out a damaged section without replacing the whole door. A backed-into panel, a dented bottom section, or a panel bent out of line on the track is the usual reason. If the rest of the door is sound, replacing the affected panel is often the more sensible fix than a full new door, and it keeps the look consistent.
We match the panel profile and color to your existing door where the manufacturer still makes it, including doors by Amarr, Wayne Dalton, and Clopay. When a match isn’t available, we walk you through the alternatives so you can decide. Typical panel replacement runs $250 – $500 depending on the number of panels and the door style, and the written estimate sets the final price. This is scheduled work, so we take measurements, confirm the panel, and book the install.
Matching the Panel
We identify your door’s make and style so the new panel lines up with the rest. A close match in color and profile keeps the door looking whole.
When a Full Door Makes More Sense
If several panels are damaged or the door is showing its age across the board, a new door may cost less overall. We’ll give you both numbers so you can weigh it.
Garage Door Maintenance
Garage Door Maintenance is the tune-up that keeps a working door working and catches small problems before they turn into a stuck door. We recommend it once a year, and it’s especially useful in Corpus Christi’s humid summers, when heat and moisture can dry out lubrication and speed up wear on moving parts. A door that’s getting louder or slower is often just overdue for service.
We lubricate the springs, hinges, and rollers, check the balance and travel limits, test the safety reverse, and inspect the cables and hardware for wear. Anything that needs attention gets quoted before we touch it. Typical maintenance and tune-up work runs $110 – $220 depending on the door and what it needs, and the written estimate sets the final price. It’s a simple way to avoid a bigger repair down the road.
What a Tune-Up Covers
Lubrication, balance check, safety-reverse test, and a look at cables, springs, and rollers. We note anything that’s wearing so you can plan ahead.
How Often to Schedule It
Once a year is a good rhythm for most homes. Doors that get heavy daily use may benefit from a check sooner if they start to sound rough.
Garage Door Roller Replacement
Garage Door Roller Replacement puts smooth, quiet rollers back in your tracks so the door glides instead of grinding. Rollers wear out over time, and a worn roller can rattle, squeal, or cause the door to bind on the way up. If your door sounds like it’s dragging or shudders as it moves, the rollers are a likely culprit.
We replace rollers in matched sets, check the tracks for alignment while we’re in there, and confirm the door runs quietly before we leave. Nylon rollers are a common upgrade over worn steel ones for quieter operation. Typical roller replacement runs $110 – $220 depending on the door size and roller type, and the written estimate sets the final price. We work on Raynor, Craftsman, and other major makes.
Noisy or Shuddering Door
A door that rattles or shudders is often telling you the rollers are worn. Replacing them restores a smooth, quiet ride.
Nylon vs. Steel
Nylon rollers run quieter than steel and are a common choice for homes where noise matters. We’ll recommend what fits your door.
Commercial Garage Door Repair
Commercial Garage Door Repair keeps a business’s overhead or roll-up door operating so a loading bay or entrance isn’t out of service. Commercial doors take far more cycles than a home door, so springs, cables, and operators wear faster. When a door stalls mid-shift, the disruption adds up quickly, and Corpus Christi businesses need it back in service without a long downtime.
We diagnose the failure, from a snapped spring to a failing operator or damaged track, and quote the fix before starting. Because commercial doors vary widely, we confirm parts and scope on site. Typical commercial repair runs $150 – $600 depending on the door type and the failure, and the written estimate sets the final price. We handle both mechanical drives and modern smart or connected operators, so the repair fits the system you already run.
High-Cycle Wear
Doors that open dozens of times a day wear springs and cables faster than a home door. Catching wear early avoids a mid-shift failure.
Operator and Control Issues
Commercial operators and their controls are a common failure point. We test the drive and the safety devices to confirm the fault before quoting.
Garage Door Cable Repair
Garage Door Cable Repair replaces the steel cables that run along the sides of the door and work with the springs to lift it. A cable can fray, snap, or jump its drum, and when that happens the door can hang crooked or refuse to move at all. A snapped cable is a safety issue, not just an inconvenience, because the door is no longer supported evenly.
We replace both cables when they’re a matched pair, reset the drums, and rebalance the door before we leave. Typical cable repair runs $130 – $250 depending on the door and the damage, and the written estimate sets the final price. Because cables work under tension alongside the springs, this is a job for a trained technician rather than a DIY fix. We’ll tell you exactly what we’re replacing and why.
Frayed or Snapped Cables
A visibly frayed cable or one that’s come off its drum needs prompt attention. Using the door in that state can damage the tracks and hardware.
Crooked or Uneven Door
A door that hangs lower on one side often points to a cable problem. We check both cables and the drums to find the cause.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We service Amarr doors and know where their panel and hardware wear points show up first, which helps us match replacement parts to the door you already own. We also work on Wayne Dalton doors, including the models with their own track and spring setups, so diagnosing a stubborn issue doesn’t mean guesswork. And we handle Craftsman openers and doors, whose controls and safety-reverse systems have their own quirks worth knowing. No matter the make, we read the door and opener as a system.
We’re factory-familiar with eight major brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, but we don’t push any one of them. Whether you have a Raynor door, a LiftMaster opener, or any other make, we can help. We recommend what fits your home, not what’s easiest for us. Your brand, our expertise.
Signs You Need a Pro Right Now
- A loud bang and a door that won’t lift. That’s usually a snapped spring, and the door is now far too heavy for the opener to raise safely. Stop using it and call a technician.
- A door stuck open. Besides the security concern, leaving a door open for hours can stress the opener and tracks. It’s worth a call rather than waiting.
- A snapped or frayed cable. A cable hanging loose or visibly frayed means the door is no longer evenly supported. Don’t run the opener until it’s checked.
- A door that reverses or won’t close. A sensor or safety-reverse fault can keep the door from closing. We test the system and set it right before it becomes a bigger problem.
- A door off its track or hanging crooked. A bent track or a door that’s come out of line can worsen the longer it’s used. Have it looked at before more damage sets in.
Our Process, Step by Step
- 1
Call and describe the problem. We ask what the door is doing and what brand it is, so we know what to expect when we arrive. Call (866) 389-3763. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
- 2
On-site diagnosis. We inspect the door, springs, cables, rollers, tracks, and opener together, because a symptom in one part often traces back to another. That’s how we find the real cause instead of chasing the noise.
- 3
Written estimate before work. You get a clear quote for the fix, and we don’t start until you agree to it. The written estimate sets the final price, so there’s no surprise on the invoice.
- 4
The repair. We carry the tools and common parts for the job, using parts matched to your door and opener. If something has to be ordered, we tell you before we begin.
- 5
Test and review. We rebalance the door, test the safety reverse, and walk you through what we did. You leave with a door that works, not just an invoice.
How Much Does Garage Door Repair Cost in Corpus Christi?
Garage door repair in Corpus Christi typically runs $150 – $600, depending on the part and the failure. A typical spring repair runs $180 – $340 for one spring, and since a matched pair is usually replaced together, a pair costs about twice that. Cable repair runs $130 – $250, roller replacement $110 – $220, panel replacement $250 – $500, and sensor or opener work $120 – $320. Track realignment sits around $120 – $240. Those are typical estimated ranges, and the written estimate sets the final price.
What moves the price: the part needed, whether it’s a matched pair, the door’s size and weight, and how much damage the failure caused. A simple sensor fix sits at the low end; a snapped cable that bent a track pushes toward the top. To avoid overpaying, get a written quote before work starts and make sure it names the parts being replaced. Our free estimate includes an on-site diagnosis, a clear explanation of what’s wrong, and a price you agree to before we touch the door. No diagnostic fee, no surprise add-ons. Call for an exact quote; estimates are free.
Our Service Area Near Corpus Christi
We serve Corpus Christi and the surrounding communities, including Portland, Taft, Gregory, Aransas Pass, Rockport, Fulton, Ingleside, and Port Aransas. Response times vary by location and how busy the day is, but we schedule same-day service where we can. If you’re in a nearby town, call and we’ll confirm the earliest opening. For regular Spencer Garage Door Repair work, we’ve got the door and opener covered wherever you are in the area.
Serving Corpus Christi, TX – Our Local Coverage Area
We serve Corpus Christi and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Garage Door Repair in Corpus Christi
Garage door repair is fixing the parts that make your door open and close: springs, cables, rollers, tracks, panels, sensors, and the opener. It’s the work that gets a stuck or failing door back to safe, normal operation. We diagnose the real cause and quote the fix before starting. Call (866) 389-3763 for an exact quote; estimates are free.
Most repairs take one to two hours on site, depending on the part and the damage. A spring or cable replacement is usually straightforward; a bent track or a special-order panel can take longer. We tell you the expected time when we quote the job. Call for an exact quote; estimates are free.
Typical repair runs $150 – $600, with spring repair at $180 – $340 for one spring and a matched pair about twice that. Cable repair is $130 – $250 and sensor or opener work $120 – $320. The written estimate sets the final price, agreed before any work starts. Call (866) 389-3763 for an exact quote; estimates are free.
Yes. We service Amarr, Wayne Dalton, Craftsman, and Raynor equipment, along with the other major brands, and we’re factory-familiar with how each one wears. Whether you have one of those or any other make, we can help. Call for an exact quote; estimates are free.
We offer same-day service when the schedule allows, and we treat stuck-open or snapped-cable calls as a priority. Call (866) 389-3763. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.
We stand behind our work and will discuss the warranty terms for your specific repair when we quote it. Ask us at the estimate so you know exactly what’s covered. Call for an exact quote; estimates are free.
Clear the area around the door and the path in front of it, and make sure we can reach the opener and any wall controls. It also helps to know your door and opener brand if you have it. If the door is stuck open, leave it as is and let us know when you call.
Schedule Your Garage Door Repair Service in Corpus Christi Today
A failing door won’t fix itself, and a small problem tends to grow. Call Spencer Garage Door Repair at (866) 389-3763 for a free, no-obligation estimate on garage door repair in Corpus Christi. We diagnose the real cause, quote the price before work starts, and stand behind the fix. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. You deserve a specialist who works on what you already have.
Written by the team at Spencer Garage Door Repair.